Creative 2030 Bedienungsanleitung PDF herunterladen (Seite 49)

Configuring the Wireless LAN USB Adapter 4-3

Configuration

Settings

1. Click the Configuration tab (see

Figure 4-3). In this tab, you can change the

default configuration settings below.

2. To create a new profile, click the Profile

box, and then type a name in the box.

3. Click the Create button.

4. To switch between profiles, click the Profile

box, and then click the profile that you

want.

5. Click the Activate button.

6. To remove a profile, click the Profile box,

and then click the profile that you want.

7. Click the Remove button.

8. Click the Operating Mode box.

If you are connecting to a network through

an access point, click Infrastructure.

If you are connecting to a network without

an access point, click Ad-hoc.

9. Click the Service Set Identifier (SSID) box.

In Infrastructure mode, set the SSID to the SSID of the access point.

In Ad-hoc mode, set the SSID to the SSID of the Ad-hoc station you want to

connect.

10.Click the Transfer Rate box, and then click the transfer rate that you want.

11.Click the Channel box.

In Infrastructure mode, you need not set the channel. The channel for the access

point is already set for you.

In Ad-hoc mode, set the channel to the channel of the Ad-hoc station you want

to connect.

Figure 4-3: Configuration tab

A profile is a set of

pre-defined values.

Service Set Identifier

(SSID) is case sensitive.

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 95 96

Keine Kommentare

Creative 2030 Bedienungsanleitung Seite 49